Sony WF-1000XM5 Help Guide - Page 34

Help Guide Wireless Noise Canceling Stereo Headset WF-1000XM5 Turning on the headset When the headset is stored in the charging case 1 Lay the headset units on their sides and remove them from the charging case. The headset turns on automatically. When you remove only one headset unit from the charging case, only the removed unit turns on. When the headset is not stored in the charging case When the headset is not worn in your ears for about 15 minutes after being removed from the charging case, the headset turns off automatically. In this case, turn the headset on by tapping the touch sensor of the headset or by putting the headset into your ears. The headset units will also turn on when they are set into the charging case and then removed from the charging case. By using the "Sony | Headphones Connect" app, you can change the setting of the headset so that it will not be turned off automatically. When the headset is turned on When both headset units are removed from the charging case, the connection is established between the left and right headset units. When turning on the headset for the first time after purchase or just after initializing the headset, the headset goes into Bluetooth pairing mode. If you tap the touch sensor when the headset is not connected via a Bluetooth connection, you will hear a notification sound indicating that the headset is turned on. When you use the headset for the first time after purchase or just after initializing the headset, the noise canceling function is turned on automatically when you put the headset units into your ears. If the noise canceling settings were changed previously, the settings are retained. Related Topic Using only one headset unit Turning off the headset What you can do with the "Sony | Headphones Connect" app 5-048-298-11(1) Copyright 2023 Sony Corporation 34