Sony WF-1000XM5 Help Guide - Page 82

When you are wearing the headset, you will hear a notification sound indicating that the connection is established from both headset units at the same time. When you are wearing only one headset unit, you will hear the notification sound from the headset unit you are wearing. If they are not connected, see "Connecting to a paired Bluetooth device". Hint The operation above is an example. For more details, refer to the operating instructions supplied with the Bluetooth device. To delete all Bluetooth pairing information, see "Initializing the headset to restore factory settings". Note If pairing is not established within 5 minutes, pairing mode is canceled. In this case, start the operation again from the beginning of step . Once Bluetooth devices are paired, there is no need to pair them again, except in the following cases: Pairing information has been deleted after repair, etc. When a 9th device is paired The headset can be paired with up to 8 devices. If a new device is paired after 8 devices are already paired, the registration information of the paired device with the oldest connection date is overwritten with the information for the new device. When the pairing information for the headset has been deleted from the Bluetooth device When the headset is initialized All of the pairing information is deleted. In this case, delete the pairing information for the headset from the connected device and then pair them again. The headset can be paired with multiple devices, but can only play music from 1 paired device at a time. Related Topic Wearing the headset Using only one headset unit How to make a wireless connection to Bluetooth devices Connecting to a paired Bluetooth device Listening to music from a device via a Bluetooth connection Disconnecting Bluetooth connection (after use) Initializing the headset to restore factory settings 5-048-298-11(1) Copyright 2023 Sony Corporation 82