Stihl FS 360 C-EM Instruction Manual - Page 16

English Using the Grass Cutting Blade All kinds of grass and weeds can be easily cut with the grass cutting blade. The power tool is swept in an arc similar to a scythe. WARNING To reduce the risk of serious or fatal injury from blade breakage, never attempt to use this blade to cut woody materials. The 4-tooth grass cutting blade is intended to cut grass and weeds. It has 4 cutting knives with cutting edges on both sides, i.e. front and rear. When the cutting edges on one side become dull, the blade can be turned over to utilize the cutting edges on the other side. The 8-tooth grass cutting blade is recommended for cutting fern or reed. Both types of grass cutting blade have to be resharpened when all cutting edges are dull. Using the Brush Knife When fitted to the power tool, the brush knife is suitable for applications ranging from cutting matted grass to clearing weeds, wild growth and scrub. 002BA355 KN 002BA509 KN To cut wild growth and scrub, lower the rotating brush knife down onto the growth to achieve a chopping effect - but keep the tool below waist height at all times. WARNING Exercise extreme caution when using this method of cutting. The higher the cutting attachment is off the ground, the greater the risk of loss of control and of cuttings being thrown sideways. Use the power tool like a scythe to cut grass, i.e. sweep it to and fro in an arc. WARNING When cutting woody materials, use the left side of the blade to avoid "kickout" (blade thrust) situations. WARNING Improper use of a brush knife may cause it to crack, chip or shatter. Thrown blade fragments may seriously or fatally injure the operator or bystanders. To reduce the risk of injury, avoid contact with hard or solid foreign objects such as stones, rocks or pieces of metal. WARNING When cutting young saplings or other woody materials up to 2 cm (3/4 in.) in diameter, use the left side of the blade to avoid "kickout" situations (see section on "Risk of kickout (blade thrust) with all rigid cutting blades"). Do not attempt to cut woody material with a larger diameter, since the blade may catch or jerk the power tool forward. This may cause damage to the blade or power tool or loss of control of the power tool, resulting in personal injury. Use a circular saw blade for such work. WARNING Inspect the brush knife at regular short intervals for signs of damage. Do not continue working with a damaged brush knife. Resharpen the brush knife regularly (when it has dulled noticeably). Using the Circular Saw Blade Circular saw blades are suitable for thinning brush and cutting small trees up to a diameter of 7 cm (2 3/4 in.). Do not attempt to cut trees with larger diameters, since the blade may catch or jerk the clearing saw forward. This may cause damage to the blade or loss of 002BA067 KN 14 FS 260 C, FS 360 C