Stihl FS 360 C-EM Instruction Manual - Page 31
Machine from Harness. Practice
View all Stihl FS 360 C-EM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Attaching machine to harness 2 1 1 2 FS 360 Putting on the harness 1 English Attaching machine to harness 2 1 1 2 002BA631 KN 002BA604 KN N Attach the carabiner (1) to the carrying ring (2) on the shaft. N Balance the machine - see "Balancing the Machine". Disconnecting machine from harness 1 1 2 2 N Press down the bar on the carabiner (1) and pull the carrying ring (2) out of the carabiner. 002BA606 KN N Attach the carabiner (1) to the perforated rail (2) on the drive tube. Disconnecting machine from harness 2 3 N Put on the full harness (1). N Adjust the length of the strap so that the carabiner (2) is about a hand's width below your right hip. N Attach the spring hook to the machine's perforated rail (3). N Find the right attachment point for the cutting attachment you are using - see "Balancing the Machine". 002BA411 KN 1 1 2 2 N Press down the bar on the carabiner (1) and pull the perforated rail (2) out of the carabiner. Throwing Off the Machine WARNING The machine must be quickly thrown off in the event of imminent danger. To throw off the machine, use the procedure described under "Detaching Machine from Harness". Practice removing and putting down the machine as you would in an emergency. To avoid damage, do not throw the power tool to the ground when practicing. 002BA632 KN FS 260 C, FS 360 C 29