Stihl FS 360 C-EM Instruction Manual - Page 32
Balancing the Machine
View all Stihl FS 360 C-EM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
002BA390 KN English Practice slipping the harness off your shoulders. Balancing the Machine FS 260 C Balanced positions Balancing the Machine 23 Mowing heads, grass cutting blades and brush knives should just touch the ground. 002BA388 KN N Loosen the screw (3). N Move the carrying ring (2) up or down the shaft - tighten the screw moderately - let the machine go and wait until it comes to a rest - then check the balanced position. When the correct balanced position has been reached: N Tighten down the screw on the carrying ring firmly. FS 360 C Circular saw blades should "hover" about 20 cm (8 in) above the ground. The correct balanced position is obtained as follows: 002BA389 KN The unit is balanced differently depending on the cutting attachment used. N With the unit suspended from the harness, see how it is balanced and change the attachment point as necessary: 30 FS 260 C, FS 360 C