Stihl FS 360 C-EM Instruction Manual - Page 25

Guard ring for mowing applications 1 2 3 Always fit guard ring (1) when using - mowing heads - grass cutting blades - brush knives - shredder blades to ensure optimum protection against grass cuttings. Guard ring for sawing applications 2 5 4 Fit guard ring (2) only when you use circular saw blades. 002BA491 KN 002BA490 KN Mounting the Thrust Plate and Guard Washer 2 1 3 4 N Fit the thrust plate (1) and guard washer (2) on the shaft (3). NOTICE The thrust plate (1) on the gearbox is necessary for mounting all cutting attachments. NOTICE The guard washer (2) is required for mounting - mowing heads - grass cutting blades - brush knives - shredder blades to the gearbox. The guard washer is not required for mounting circular saw blades. 002BA407 KN Checking the Thrust Plate English 2 2 681BA196 KN 1 1 The thrust plate consists of the thrust plate body (1) to which a captive guard washer (2) is fitted. WARNING Never use a thrust plate without the guard washer. Always replace a thrust plate if the guard washer is missing. Cleaning Gearbox Mounting Hardware for Cutting Attachment 2 1 3 4 NOTICE Check inside of guard ring (4) and area around it for dirt at regular intervals, or when you change the cutting attachment, and clean if necessary as follows: 002BA407 KN FS 260 C, FS 360 C 23