Stihl FS 360 C-EM Instruction Manual - Page 47

The following intervals apply to normal operating conditions only. If your daily work

Get Stihl FS 360 C-EM PDF manuals and user guides View all Stihl FS 360 C-EM manuals
Add to My Manuals
Save this manual to your list of manuals

Page 47 highlights

The following intervals apply to normal operating conditions only. If your daily working time is longer or operating conditions are difficult (very dusty work area, etc.), shorten the specified intervals accordingly. Spacer Check X Replace2) X Exhaust port Decoke after first 139 hours of operation, then every 150 hours of operation2) All accessible screws and nuts (not adjusting screws) Retighten3) Visual inspection4) X Anti-vibration elements Replace2) Visual inspection X X Cutting attachment Replace Check tightness X X Metal cutting attachment Sharpen X Safety labels Replace 1) Only if there is a noticeable loss of engine power 2) STIHL recommends that this work be done by a STIHL servicing dealer 3) Tighten down the muffler mounting screws firmly after first 10 to 20 hours of operation. 4) see chapter "Inspections and Maintenance by Dealer", section "Antivibration Elements" before starting work after finishing work or daily after each refueling stop weekly monthly every 12 months if problem if damaged as required English X X X X X X X X FS 260 C, FS 360 C 45

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
FS 260 C, FS 360 C
English
45
Spacer
Check
X
Replace
2)
X
X
Exhaust port
Decoke after first 139 hours of opera
-
tion, then every 150 hours of operation
2)
X
All accessible screws and nuts (not adjust
-
ing screws)
Retighten
3)
X
Anti-vibration elements
Visual inspection
4)
X
X
Replace
2)
X
Cutting attachment
Visual inspection
X
X
Replace
X
Check tightness
X
X
Metal cutting attachment
Sharpen
X
X
Safety labels
Replace
X
1)
Only if there is a noticeable loss of engine power
2)
STIHL recommends that this work be done by a STIHL servicing dealer
3)
Tighten down the muffler mounting screws firmly after first 10 to 20 hours of operation.
4)
see chapter "Inspections and Maintenance by Dealer", section "Antivibration Elements"
The following intervals apply to normal operating conditions only. If your daily work
-
ing time is longer or operating conditions are difficult (very dusty work area, etc.),
shorten the specified intervals accordingly.
before starting work
after finishing work or daily
after each refueling stop
weekly
monthly
every 12 months
if problem
if damaged
as required