Stihl FS 360 C-EM Instruction Manual - Page 30
Fueling, Fitting the Full Harness
View all Stihl FS 360 C-EM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
English Fueling Opening the fuel filler cap Fitting the Full Harness Preparations Fitting the full harness is described in detail in the instruction sheet supplied. The type and style of the harness depend on the market. FS 260 2709BA003 KN N Turn the fuel filler cap counterclockwise until it can be removed from the tank opening. N Remove the fuel filler cap. Refueling Putting on the harness 1 2709BA025 KN WARNING When fueling on a slope, always position the machine so that the fuel filler cap is facing uphill. N On level ground, position the machine so that the fuel filler cap is facing up. N Before fueling, clean the fuel filler cap and the area around it to ensure that no dirt falls into the tank. Always thoroughly shake the mixture in the canister before fueling your machine. WARNING In order to reduce the risk of fire and personal injury from escaping gas vapor and fumes, remove the fuel filler cap carefully so as to allow any pressure build-up in the tank to release slowly. Take care not to spill fuel while fueling and do not overfill the tank. Closing the fuel filler cap N Position fuel filler cap. N Turn the fuel filler cap clockwise as far as it will go and tighten it as securely as possible by hand. 2709BA004 KN 2 N Put on the full harness (1). N Adjust the length of the strap so that the carabiner (2) is about a hand's width below your right hip. 002BA607 KN 28 FS 260 C, FS 360 C