Stihl FS 360 C-EM Instruction Manual - Page 28
Notice
View all Stihl FS 360 C-EM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
English 1 2 3 Check direction of rotation of cutting attachment 002BA490 KN N Remove the guard washer (1) and thrust plate (2). N Remove the guard ring (3) for mowing attachments. N Keep the guard washer and guard ring in a safe place for future use. 2 5 4 Cutting edges of circular saw blades must point clockwise. 4 3 2 1 b a 002BA491 KN N Fit the guard ring (4) for saw blades. N Slip the thrust plate (2) over the shaft. N Fit the limit stop (5) for circular saw blades. NOTICE Do not use the guard washer (1) with circular saw blades. N Place the cutting attachment (1) in position. WARNING Collar (a) must locate in the cutting attachment's mounting hole (b). 002BA423 KN 681BA165 KN Securing the cutting attachment N Fit the thrust washer (2) - convex side must face up. N Fit the rider plate (3). A rider plate (3) for sawing applications is available as a special accessory. It allows the full depth of cut of the saw blade to be used. N Block the shaft. N Fit the nut (4) counterclockwise and tighten it down firmly. WARNING If the mounting nut has become too loose, fit a new one. NOTICE Remove the tool used to block the shaft. Removing the cutting attachment N Block the shaft. N Unscrew the mounting nut clockwise. N Pull the cutting attachment with its mounting hardware off the gearbox. 26 FS 260 C, FS 360 C