Stihl FS 360 C-EM Instruction Manual - Page 33
Starting / Stopping the, Engine
View all Stihl FS 360 C-EM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Balanced positions Starting / Stopping the Engine Controls Start the engine. 4 English 9926BA006 KN 6BA009 KN Mowing heads, grass cutting blades and brush knives should just touch the ground. 3 2 1 N Press the manual fuel pump bulb (4) at least five times - even if the bulb is filled with fuel. Cold engine (cold start) 5 6BA010 KN 9926BA007 KN 002BA483 KN Circular saw blades should "hover" about 20 cm (8 in) above the ground. 1 Throttle trigger lockout 2 Throttle trigger 3 Stop switch with Run and Stop positions. Depress the stop switch (...) to switch off the ignition. Function of stop switch and ignition system The stop switch is normally in the Run position, i.e. when it is not depressed: The ignition is switched on - the engine is ready to start. Operate the stop switch to switch off the ignition. The ignition is switched on again automatically after the engine stops. N Press in the outer edge (arrows) of the choke knob (5) and then turn it to g . Also use this setting if the engine has been running but is still cold. Hot engine (hot start) The engine has reached normal operating temperature, then shut down and restarted after more than 5 minutes. FS 260 C, FS 360 C 31