Stihl FS 360 C-EM Instruction Manual - Page 27
Mounting Circular Saw Blades
View all Stihl FS 360 C-EM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Check direction of rotation of cutting attachment Cutting edges of grass cutting blade 255-8 (1) must point clockwise. Cutting attachments with 3 or 4 teeth (2, 3) may point in either direction - these cutting attachments must be turned over regularly to help avoid one-sided wear. N Use guard ring for mowing attachments. 4 3 2 1 b a N Place the cutting attachment (1) in position. WARNING Collar (a) must locate in the cutting attachment's mounting hole (b). Securing the cutting attachment N Fit the thrust washer (2) - convex side must face up. N Fit the rider plate (3). N Block the shaft. N Fit the nut (4) counterclockwise and tighten it down firmly. 002BA409 KN English Removing the cutting attachment N Block the shaft. N Unscrew the mounting nut clockwise. N Pull the cutting attachment with its mounting hardware off the gearbox. Mounting Circular Saw Blades A limit stop kit, which includes a limit stop and a guard ring for circular saw blades, is available as a special accessory for mounting circular saw blades. Note on new machines that come standard with a mowing head only: Further mounting hardware is necessary for a circular saw blade. It is available from your servicing dealer. Change the guard ring. Recommendation: The guard ring must be mounted with particular care. Have this work performed by your servicing dealer. STIHL recommends a STIHL servicing dealer. WARNING If the mounting nut has become too loose, fit a new one. NOTICE Remove the tool used to block the shaft. FS 260 C, FS 360 C 25