Stihl FS 360 C-EM Instruction Manual - Page 3

Contents English Original Instruction Manual Printed on chlorine-free paper Printing inks contain vegetable oils, paper can be recycled. Guide to Using this Manual 2 Specifications 48 Allow only persons who fully understand Safety Precautions and Working Techniques Maintenance and Repairs 3 Disposal 49 this manual to operate your clearing saw. 49 Approved Combinations of Cutting Attachment, Deflector, Limit Stop and Harness 17 Mounting the Bike Handle 18 Allocation of STIHL Incorporated Warranty Declarations STIHL Incorporated Federal Emission Control Warranty 50 To receive maximum performance and satisfaction from your STIHL clearing saw, it is important that you read, understand and follow the safety precautions and the operating and Adjusting the Throttle Cable 21 Statement 50 maintenance instructions in chapter Mounting the Deflector 22 Allocation of STIHL Incorporated "Safety Precautions and Working Mounting the Cutting Attachment 22 Warranty Declarations 52 Techniques" before using your clearing Fuel Fueling Fitting the Full Harness Balancing the Machine 27 STIHL Incorporated Federal 28 Emission Control Warranty Statement 28 STIHL Incorporated California 30 Exhaust and Evaporative saw. For further information you can go to www.stihlusa.com. 52 Contact your STIHL dealer or the STIHL distributor for your area if you do not understand any of the instructions in this Starting / Stopping the Engine 31 Emissions Control Warranty manual. Operating Instructions 33 Statement 54 Air filter 34 Trademarks 57 WARNING Engine Management 35 Adjusting the Carburetor 35 Winter Operation 35 Spark Plug 37 Engine Running Behavior 38 Rewind Starter 39 Storing the Machine 39 Sharpening Metal Cutting Blades 39 Maintaining the Mowing Head 40 Inspection and Maintenance by User 41 Because a clearing saw is a high-speed cutting tool some special safety precautions must be observed to reduce the risk of personal injury. Careless or improper use may cause serious or even fatal injury. Make sure your unit is equipped with the proper deflector, handle and harness for the type of cutting attachment being used. Always wear proper eye protection. Inspections and Maintenance by Dealer 43 Maintenance and Care 44 Main Parts 46 { FS 260 C, FS 360 C This instruction manual is protected by copyright. All rights reserved, especially the rights to reproduce, translate and process with electronic systems. 1 © ANDREAS STIHL AG & Co. KG, 2015 0458-743-8621-B. VA7.A15. 0000003973_016_GB