Stihl FS 360 C-EM Instruction Manual - Page 34

Do not let the starter grip snap back.

Get Stihl FS 360 C-EM PDF manuals and user guides View all Stihl FS 360 C-EM manuals
Add to My Manuals
Save this manual to your list of manuals

Page 34 highlights

English NOTICE N Do not let the starter grip snap back. Guide it slowly back into the housing Do not stand or kneel on the drive tube. so that the starter rope can rewind properly. 5 N Continue cranking until engine runs. As soon as the engine runs 9926BA008 KN 6BA012 KN 6BA014 KN N Press in the outer edge (arrows) of the choke knob (5) and then turn it to

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
FS 260 C, FS 360 C
English
32
N
Press in the outer edge (arrows) of
the choke knob (5) and then turn it
to
<
.
Cranking
N
Place the unit on the ground: It must
rest securely on the engine's guard
plate and the deflector.
N
If fitted: Remove the transport guard
from the cutting attachment.
To reduce the risk of accidents
, check
that the cutting attachment is not
touching the ground of any other
obstacles.
N
Make sure you have a firm footing,
either standing, stooping or
kneeling.
N
Hold the unit
firmly
on the ground
with your left hand and press down
– do not touch the throttle trigger or
lockout lever – your thumb should
be under the fan housing.
NOTICE
Do not stand or kneel on the drive tube.
N
Hold the starter grip with your right
hand.
Alternative method of starting:
Engine warm and the machine hanging
from the harness.
N
Hold the machine firmly with your
right hand on the drive tube, handle
support or handlebar.
N
With the machine behind you, press
it against the left side of your body.
N
Hold the starter grip with your left
hand.
Both methods:
N
Pull the starter grip steadily.
NOTICE
Do not pull out the starter rope all the
way –
it might otherwise break
.
N
Do not let the starter grip snap back.
Guide it slowly back into the housing
so that the starter rope can rewind
properly.
N
Continue cranking until engine runs.
As soon as the engine runs
N
Press down the throttle trigger
lockout and open the throttle – the
choke knob moves to the run
position
F
. After a cold start, warm
up the engine by opening the
throttle several times.
WARNING
Make sure the carburetor is correctly
adjusted. The cutting attachment must
not rotate when the engine is idling.
Your machine is now ready for
operation.
Stopping the Engine
N
Depress the momentary contact
stop switch – the engine stops –
release the stop switch – it springs
back to the run position.
9926BA008 KN
5
6BA011 KN
6BA012 KN
6BA013 KN
6BA014 KN