Stihl FS 360 C-EM Instruction Manual - Page 49
Deflector for Metal Mowing Tools
View all Stihl FS 360 C-EM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Definitions 1 Fuel Filler Cap For closing the fuel tank. 2 Carburetor Adjusting Screws For tuning the carburetor. 3 Starter Grip The grip of the pull starter, for starting the engine. 4 Shutter With summer and winter positions. Carburetor is heated in winter position. 5 Spark Plug Boot Connects the spark plug with the ignition lead. 6 Muffler with Spark Arresting Screen Muffler reduces exhaust noises and diverts exhaust gases away from operator. Spark arresting screen is designed to reduce the risk of fire. 7 Spacer Designed to reduce the risk of burns and fire. 8 Guard Plate Protects the fuel tank. 9 Throttle Trigger Controls the speed of the engine. 10 Momentary Stop Switch Switches the engine's ignition off and stops the engine. 11 Throttle Trigger Lockout Must be depressed before the throttle trigger can be activated. 12 Handlebar For holding and controlling the unit with the hand during operation. 13 Clamp Screw Locks handlebar in selected position. 14 Carrying Strip The device to connect the clearing saw to the harness. 15 Wear Guard Protects the housing of the antivibration-system from wear. 16 Choke Lever Eases engine starting by enriching mixture. 17 Manual Fuel Pump Provides additional fuel feed for a cold start. 18 Filter Cover Encloses and protects the air filter. 19 Fuel Tank For fuel and oil mixture. 20 Carrying Ring Connects the unit to the harness. 21 Throttle Cable Retainer Secures the throttle cable to the drive tube. 22 Handle Support Connects the shaft and bike handle. English 002BA412 KN 2 1 3 1 Mowing Head 2 Deflector for Mowing Heads 3 Line Limiting Blade 4 5 002BA417 KN 4 Metal Mowing Tool 5 Deflector for Metal Mowing Tools Definitions 1 Mowing Head The cutting attachment, i. e. mowing head, for different purposes. 2 Deflector for Mowing Heads Designed to reduce the risk of injury from foreign objects flung backwards toward the operator by the cutting attachment and from contact with the cutting attachment. 3 Line Limiting blade Metal blade at the deflector in order to keep the line of the mowing head at the proper length. FS 260 C, FS 360 C 47