Stihl FS 360 C-EM Instruction Manual - Page 20

6BA018 KN English 2 STIHL AutoCut 40-2 3 STIHL TrimCut 41-2 4 STIHL DuroCut 40-4 5 STIHL PolyCut 41-3 Metal cutting attachments 6 Grass cutting blade 230-4 (Ø 230 mm) 7 Grass cutting blade 255-8 (Ø 255 mm) 8 Brush knife 300-3 (Ø 300 mm) 9 Scratcher tooth circular saw blade 200 (Ø 200 mm) 10 Chisel tooth circular saw blade 200 (Ø 200 mm) 11 Scratcher tooth circular saw blade 225 (Ø 225 mm) 12 Chisel tooth circular saw blade 225 (Ø 225 mm) WARNING Non-metal grass cutting blades, brush knives and circular saw blades are not approved. Deflectors, Limit Stops 13 Deflector for mowing heads 14 Deflector for metal cutting attachments, items 6 to 8 15 Limit stop for circular saw blades, items 9 and 10 16 Limit stop for circular saw blades, items 11 and 12 Harness 17 Full harness must be used WARNING Based on the cutting attachment being used: Choose the proper deflector in order to reduce the risk of injury from thrown objects and contact with the cutting attachment. Make sure your unit is equipped with the proper handle and harness in order to reduce the risk of injury from loss of control and contact with the cutting attachment. Use grass cutting metal blades, brush knifes and circular saw blades on this unit only if equipped with a bike handle. Do not use rigid polymer blades on this unit. Mounting the Bike Handle Mounting Bike Handle with Swivelling Handle Support 2 1 The machine is supplied with the clamp moldings (1) mounted to the handlebar (2). Mounting the Control Handle 3 5 4 N Take out the screw (3) and remove the nut (4) from the control handle (5). 002BA352 KN 18 FS 260 C, FS 360 C