Stihl TS 410 Instruction Manual - Page 32

English Troubleshooting Cutting wheel Problem Likely Cause Possible Remedy Frayed edges or tears, cut wanders out Radial or axial run-out of line, increased wear at the sides of the segments Replace the spindle bearing; consult an authorized servicing dealer before use Cutting wheel wobbles Use a new cutting wheel Frayed edges, cut wanders out of line, lit- Cutting wheel is blunt; built-up edges on cut- Dress the cutting wheel for stone by tle or no cutting performance, sparking ting wheels for stone briefly cutting in abrasive material; replace with a new cutting wheel Poor cutting performance, high level of segment wear Cutting wheel rotates in the wrong direction Mount the cutting wheel in correct direc- or the cutting wheel is worn out tion of rotation; replace the cutting wheel if it is worn out Chipping or cracking in the wheel core Overload and segments Replace immediately with a new cutting wheel Undercutting Cutting material for which the wheel is not Use a new cutting wheel rated 30 TS 410, TS 420