Stihl TS 410 Instruction Manual - Page 36
Tensioning the Ribbed V-belt
View all Stihl TS 410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
English N Screw in the bolt (1) and tighten up N Unscrew stop pin (3) Checking the adjustment range of the guard Tensioning the Ribbed V-belt This machine is equipped with an automatic spring-action V-belt tensioning device. 370BA082 KN 3 N Turn the guard so that it is in the position shown (see picture) N Screw in and tighten the stop pin (3) N Install the adjusting lever N Mount "cast arm with guard" - guard on the inboard side N Install the V-belt guard N Connect water connection A N Rotate the guard forwards and backwards as far as possible - adjustment range (A) must be limited by the stop pin Continue as described in the chapter "Tensioning the V-belt". 370BA083 KN 2 1 0 1 1 370BA037 KN Prior to tensioning the ribbed V-belt, the nuts (1) must be loosened and the arrow on the tensioning nut (2) must point to 0. N otherwise loosen the nuts (1) and the tensioning nut (2) with the combination wrench counterclockwise - approx. 1/4 turn, as far as possible = 0 370BA012 KN 1 11 N to tighten the ribbed V-belt, fit the combination wrench over the tensioning nut as illustrated WARNING The tensioning nut is spring-loaded - hold the combination wrench securely. 34 TS 410, TS 420