Stihl TS 410 Instruction Manual - Page 54
Specifications
View all Stihl TS 410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
English Specifications EPA / CEPA The Emission Compliance Period referred to on the Emissions Compliance Label indicates the number of operating hours for which the engine has been shown to meet Federal emission requirements. Category A = 300 hours B = 125 hours C = 50 hours CARB The Emission Compliance Period used on the CARB-Air Index Label indicates the terms: Extended = 300 hours Intermediate = 125 hours Moderate = 50 hours Engine STIHL single cylinder two-stroke engine TS 410 Displacement: Cylinder bore: Piston stroke: 4.07 cu. in. (66.7 cm3) 1.97 in. (50 mm) 1.34 in. (34 mm) Engine power accord- 4.3 hp (3.2 kW) ing to ISO 7293: at 9000 rpm Idling speed: 2500 rpm Maximum spindle speed: 5350 rpm TS 420 Displacement: 4.07 cu. in. (66.7 cm3) Cylinder bore: 1.97 in. (50 mm) Piston stroke: 1.34 in. (34 mm) Engine power accord- 4.3 hp (3.2 kW) ing to ISO 7293: at 9000 rpm Idling speed: 2500 rpm Maximum spindle speed: 5350 rpm Ignition system Electronic magneto ignition Spark plug (suppressed): Electrode gap: Bosch WSR 6 F 0.02 in. (0.5 mm) Fuel system All position diaphragm carburetor with integral fuel pump Fuel tank capacity: 24.0 oz (0.71 l) Air filter Main filter (paper filter) and flocked wire mesh auxiliary filter Weight Without fuel, without abrasive wheel, with water attachment TS 410: 20.7 lbs (9.4 kg) TS 420: 21.2 lbs (9.6 kg) Without fuel, without abrasive wheel, with electronic water control TS 410: 21.8 lbs (9.9 kg) TS 420: 22.3 lbs (10.1 kg) Abrasive wheels The quoted maximum permissible operating speed of the abrasive wheel must be greater than or equal to the maximum spindle speed of the cut-off machine used. Abrasive wheels (TS 410) Outside diameter: Max. thickness: Bore diameter/spindle diameter: Tightening torque: 12 in. (300 mm) 0.189 in. (4.8 mm) 0.787 in. (20 mm) 22 lbf ft (30 Nm) Composite resin abrasive wheels Minimum outside diameter of 4.06 in. thrust washers: (103 mm) Max. depth of cut: 3.9 in. (100 mm) 52 TS 410, TS 420