Stihl TS 410 Instruction Manual - Page 50

English Maintenance and Care The following maintenance intervals apply in normal operating conditions. The specified intervals must be shortened accordingly when working for longer than normal or under difficult cutting conditions (extensive dust, etc.). before starting work at the end of work and/or daily Whenever tank is refilled Weekly Monthly Yearly if not functioning properly If damaged As required Complete machine Visual inspection (condition, leaks) X Clean Operating controls Check operation X Manual fuel pump (if fitted) Check X Have repaired by a specialist dealer1) Fuel pick-up body in fuel tank test, check Replace Fuel tank Clean Ribbed V-belt Clean / retension Replace Air filter (all filter components) Replace Cooling air intake slits Clean Cylinder fins Have them cleaned by a specialist dealer 1) Spark arresting screen2) in muffler test, check Clean or replace Water attachment test, check x Have them maintained by a specialist dealer1) Carburetor Check idle adjustment - abrasive wheel must not rotate X Readjust idle speed Spark plug Adjust electrode gap Replace after 100 hours' operation All accessible screws, nuts and bolts (not adjusting screws) Retighten 48 X X X X X X X X X X X X X Only if there is a noticeable loss of engine power X X X X x x X X X X X TS 410, TS 420