TASCAM Celesonic US-20x20 Owners Manual - Page 10

Connecting the power Use the included AC adapter to connect a power supply to the unit as shown below. Power outlet GPE248-120200-Z (included) DC plug In order to prevent the cord from becoming disconnected during use, wrap it around the cord holder when connecting it. CAUTION Always use the AC adapter (GPE248-120200-Z) that was shipped with the unit. Using a different AC adapter could cause malfunction, overheating, fire or other problems. NOTE The AC adapter for the unit includes two types of outlet plugs. Attach the type of plug that matches the power outlet that you are using. See "Changing the outlet plug" on page 10. Changing the outlet plug 3 2 $ 5 % 1 4 CAUTION Do not use the adapter if there is anything abnormal about the plug after changing it. Use when the plug is abnormal could cause fire or electric shock. Contact the retailer where you purchased the unit or a TEAC service center (on the back cover) to request repair. Connecting with a computer Two types of USB cables (USB 2.0 and USB 3.0) are included with this unit. Select one of the included USB cables according to the computer and operating system being used and use it to connect the unit to a computer USB 2.0 or USB 3.0 port. NOTE A USB2.0 speed connection will be used if the unit is connected to a USB3.0 port on the computer using a USB2.0 cable. Check the TEAC Global Site (http://teac-global.com/) for the latest information about supported operating systems. 88 Windows Supported operating systems USB standard Connected USB 2.0 USB 3.0 USB cable Windows 10 32-bit ü ü* USB 3.0 cable* Windows 10 64-bit ü ü* USB 2.0 cable Windows 8.1 32-bit Windows 8.1 64-bit ü - ü USB 2.0 cable - Windows 7 32-bit SP1 or later ü Windows 7 64-bit SP1 or later ü USB 2.0 cable - * Connect with the included USB 3.0 cable to use the USB 3.0 standard. 88 Mac Supported operating USB standard Connected systems USB 2.0 USB 3.0 USB cable OS X El Capitan (10.11.2 or later) ü USB 3.0 cable* ü* USB 2.0 cable OS X Yosemite (10.10.1 or later) ü - USB 2.0 cable OS X Mavericks (10.9.5) ü - USB 2.0 cable OS X Mountain Lion (10.8.5) ü - USB 2.0 cable * Connect with the included USB 3.0 cable to use the USB 3.0 standard. 1 Move the latch on the AC adapter in the direction of the arrow. 2 Pull off the outlet plug. 3 Replace it with the other outlet plug (A or B). 4 Move the latch on the AC adapter in the direction of the arrow again. 5 Attach the outlet plug to the AC adapter. After changing the outlet plug, confirm that it is not loose or crooked and that everything is normal before plugging it into an outlet 10 TASCAM US-20x20