TP-Link 3G/4G TL-MR3220 V2 User Guide - Page 46
Wireless
View all TP-Link 3G/4G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
TL-MR3220 3G/4G Wireless N Router User Guide 2) If the new LAN IP Address you set is not in the same subnet, the IP Address pool of the DHCP server will change accordingly at the same time,while the Virtual Server and DMZ Host will not take effect until they are re-configured. 4.6 Wireless Figure 4-19 Wireless menu There are five submenus under the Wireless menu (shown in Figure 4-19): Wireless Settings, Wireless Security, Wireless MAC Filtering, Wireless Advanced and Wireless Statistics. Click any of them, and you will be able to configure the corresponding function. 4.6.1 Wireless Settings Choose menu "Wireless→Wireless Settings", you can configure the basic settings for the wireless network on this page. Figure 4-20 Wireless Settings Wireless Network Name - Enter a value of up to 32 characters. The same name of Wireless Network Name must be assigned to all wireless devices in your network. Considering your wireless network security, the default Wireless Network Name is set to be TP-LINK_XXXXXX (XXXXXX indicates the last six unique numbers of each Router's MAC address). This value is case-sensitive. For example, TEST is NOT the same as test. Region - Select your region from the pull-down list. This field specifies the region where the wireless function of the Router can be used. It may be illegal to use the wireless -37-