TP-Link T1700X-16TS T1700X-16TSUN V1 User Guide - Page 126

VLAN Config

Page 126 highlights

The following entries are displayed on this screen:  Port Config UNIT:1/LAGS: Select: Port: IGMP Snooping: Fast Leave: LAG: Click 1 to configure the physical ports. Click LAGS to configure the link aggregation groups. Select the desired port for IGMP snooping feature configuration. It is multi-optional. Displays the port of the switch. Enable/Disable IGMP snooping for the desired port. Enable/Disable Fast Leave feature for the desired port. If Fast Leave is enabled for a port, the switch will immediately remove this port from the multicast group upon receiving IGMP leave messages. Displays the LAG number which the port belongs to. Note: 1. Fast Leave on the port is effective only when the host supports IGMPv2 or IGMPv3. 2. When Fast Leave feature is enabled, the leaving of a user connected to a port owning multi-user will result in the other users intermitting the multicast business. 8.1.3 VLAN Config Multicast groups established by IGMP snooping are based on VLANs. On this page you can configure different IGMP parameters for different VLANs. Choose the menu Multicast→IGMP Snooping→VLAN Config to load the following page. Figure 8-7 VLAN Config 115

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265

The following entries are displayed on this screen:
Port Config
UNIT:1/LAGS:
Click
1
to configure the physical ports. Click
LAGS
to configure the
link aggregation groups.
Select:
Select the desired port for IGMP snooping feature configuration. It
is multi-optional.
Port:
Displays the port of the switch.
IGMP Snooping:
Enable/Disable IGMP snooping for the desired port.
Fast Leave:
Enable/Disable Fast Leave feature for the desired port. If Fast
Leave is enabled for a port, the switch will immediately remove
this port from the multicast group upon receiving IGMP leave
messages.
LAG:
Displays the LAG number which the port belongs to.
Note:
1.
Fast Leave on the port is effective only when the host supports IGMPv2 or IGMPv3.
2.
When Fast Leave feature is enabled, the leaving of a user connected to a port owning
multi-user will result in the other users intermitting the multicast business.
8.1.3 VLAN Config
Multicast groups established by IGMP snooping are based on VLANs. On this page you can
configure different IGMP parameters for different VLANs.
Choose the menu
Multicast
IGMP Snooping
VLAN Config
to load the following page.
Figure 8-7 VLAN Config
115