TP-Link T1700X-16TS T1700X-16TSUN V1 User Guide - Page 175
OUI Config
View all TP-Link T1700X-16TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 175 highlights
Figure 10-13 Port Config Note: 1. To enable voice VLAN function for the LAG member port, please ensure its member state accords with its port mode. 2. If a port is a member port of voice VLAN, changing its port mode to be "Auto" will make the port leave the voice VLAN and will not join the voice VLAN automatically until it receives voice streams. The following entries are displayed on this screen: Port Config UNIT:1/LAGS: Select: Port: Port Mode: Security Mode: Member State: LAG: Click 1 to configure the physical ports. Click LAGS to configure the link aggregation groups. Select the desired port for voice VLAN configuration. It is multi-optional. Displays the port number of the switch. Select the mode for the port to join the voice VLAN. Auto: In this mode, the switch automatically adds a port to the voice VLAN or removes a port from the voice VLAN by checking whether the port receives voice data or not. Manual: In this mode, you can manually add a port to the voice VLAN or remove a port from the voice VLAN. Configure the security mode for forwarding packets. Disable: All packets are forwarded. Enable: Only voice data are forwarded. Displays the state of the port in the current voice VLAN. Displays the LAG number which the port belongs to. 10.3.3 OUI Config The switch supports OUI creation and adds the MAC address of the special voice device to the OUI table of the switch. The switch determines whether a received packet is a voice packet by checking its OUI address. The switch analyzes the received packets. If the packets recognized as voice packets, the access port will be automatically added to the Voice VLAN. 164