TP-Link T1700X-16TS T1700X-16TSUN V1 User Guide - Page 248
Global Config, 4.2 Port Config
View all TP-Link T1700X-16TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 248 highlights
TLV Inventory TLV Description The Inventory TLV set contains seven basic Inventory management TLVs, that is, Hardware Revision TLV, Firmware Revision TLV, Software Revision TLV, Serial Number TLV, Manufacturer Name TLV, Model Name TLV and Asset ID TLV. If support for any of the TLVs in the Inventory Management set is implemented, then support for all Inventory Management TLVs shall be implemented. LLDP-MED is configured on the Global Config, Port Config, Local Info and Neighbor Info pages. 14.4.1 Global Config On this page you can configure the LLDP-MED parameters of the device globally. Choose the menu LLDP→LLDP-MED→Global Config to load the following page. Figure 14-6 LLDP-MED Global Configuration The following entries are displayed on this screen: LLDP-MED Parameters Config Fast Start Count: Device Class: When LLDP-MED fast start mechanism is activated, multiple LLDP-MED frames will be transmitted based on this parameter. LLDP-MED devices are comprised of two primary device types: Network Connectivity Devices and Endpoint Devices. In turn, Endpoint Devices are composed of three defined Classes: Class I, Class II and Class III. Bridge is a Network Connectivity Device. 14.4.2 Port Config On this page you can configure all ports' LLDP-MED parameters. Choose the menu LLDP→LLDP-MED→Port Config to load the following page. 237