TP-Link TL-WR840N User Guide - Page 44

Group Key Update Period

Get TP-Link TL-WR840N PDF manuals and user guides View all TP-Link TL-WR840N manuals
Add to My Manuals
Save this manual to your list of manuals

Page 44 highlights

TL-WR840N 300Mbps Wireless N Router User Guide • PSK Passphrase - You can enter ASCII characters between 8 and 63 characters or 8 to 64 Hexadecimal characters. • Group Key Update Period - Specify the group key update interval in seconds. The value should be 30 or above. Enter 0 to disable the update.  WPA /WPA2 - Enterprise - It's based on Radius Server. • Version - you can choose the version of the WPA security on the drop-down list. The default setting is Automatic, which can select WPA (Wi-Fi Protected Access) or WPA2 (WPA version 2) automatically based on the wireless station's capability and request. • Encryption - You can select either Automatic, or TKIP or AES.  Note: If you check the WPA /WPA2 - Enterprise radio button and choose TKIP encryption, you will find a notice in red as shown in Figure 4-19. Figure 4-19 • Radius Server IP - Enter the IP address of the Radius server. • Radius Port - Enter the port number of the Radius server. • Radius Password - Enter the password for the Radius server. • Group Key Update Period - Specify the group key update interval in seconds. The value should be 30 or above. Enter 0 to disable the update.  WEP - It is based on the IEEE 802.11 standard. If you check this radio button, you will find a notice in red as show in Figure 4-20. Figure 4-20 • Type - you can choose the type for the WEP security on the drop-down list. The default setting is Automatic, which can select Shared Key or Open System authentication type automatically based on the wireless station's capability and request. - 35 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
TL-WR840N
300Mbps Wireless N Router User Guide
- 35 -
•
PSK Passphrase -
You can enter ASCII characters between 8 and 63 characters or 8 to
64 Hexadecimal characters.
•
Group Key Update Period -
Specify the group key update interval in seconds. The value
should be 30 or above. Enter 0 to disable the update.
WPA /WPA2 – Enterprise -
It’s based on Radius Server.
•
Version
-
you can choose the version of the WPA security on the drop-down list. The
default setting is
Automatic
, which can select
WPA (
Wi-Fi Protected Access) or
WPA2
(
WPA version 2) automatically based on the wireless station's capability and request.
•
Encryption -
You can select either
Automatic
, or
TKIP
or
AES.
Note:
If you check the
WPA /WPA2 – Enterprise
radio button and choose TKIP encryption, you
will find a notice in red as shown in Figure 4-19.
Figure 4-19
•
Radius Server IP -
Enter the IP address of the Radius server.
•
Radius Port -
Enter the port number of the Radius server.
•
Radius Password -
Enter the password for the Radius server.
•
Group Key Update Period -
Specify the group key update interval in seconds. The value
should be 30 or above. Enter 0 to disable the update.
WEP -
It is based on the IEEE 802.11 standard. If you check this radio button, you will find a
notice in red as show in Figure 4-20.
Figure 4-20
•
Type
-
you can choose the type for the WEP security on the drop-down list. The default
setting is
Automatic
, which can select
Shared Key
or
Open System
authentication type
automatically based on the wireless station's capability and request.