TP-Link TL-WR840N User Guide - Page 79
IP & MAC Binding Setting
View all TP-Link TL-WR840N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
TL-WR840N 300Mbps Wireless N Router User Guide 4.14 IP & MAC Binding Setting Figure 4-67 the IP & MAC Binding menu There are two submenus under the IP &MAC Binding menu (shown in Figure 4-67): Binding Settings and ARP List. Click any of them, and you will be able to scan or configure the corresponding function. The detailed explanations for each submenu are provided below. 4.14.1 Binding Settings This page displays the IP & MAC Binding Setting table; you can operate it in accord with your desire as shown in Figure 4-68. Figure 4-68 Binding Settings MAC Address - The MAC address of the controlled computer in the LAN. IP Address - The assigned IP address of the controlled computer in the LAN. Bind - Check this option to enable ARP binding for a specific device. Modify - To modify or delete an existing entry. When you want to add or modify an IP & MAC Binding entry, you can click the Add New... button or Modify button, and then you will go to the next page. This page is used for adding or modifying an IP & MAC Binding entry, shown in Figure 4-69. - 70 -