TP-Link TL-WR843ND TL-WR843ND V1 User Guide - Page 55
TL-WR843ND, Automatic, WPA-PSK, Encryption, PSK Password, Group Key Update Period
View all TP-Link TL-WR843ND manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
TL-WR843ND 300Mbps Wireless AP/Client Router User Guide default setting is Automatic, which can select WPA-PSK (Pre-shared key of WPA) or WPA2-PSK (Pre-shared key of WPA) automatically based on the wireless station's capability and request. Encryption - When WPA-PSK or WPA is set as the Authentication Type, you can select either Automatic, or TKIP or AES as Encryption. Note: If you check the WPA-PSK/WPA2-PSK - Personal (Recommended) radio button and choose TKIP encryption, you will find a notice in red as shown in Figure 4-22. Figure 4-22 PSK Password - You can enter ASCII characters between 8 and 63 characters or 8 to 64 Hexadecimal characters. Group Key Update Period - Specify the group key update interval in seconds. The value should be 30 or above. Enter 0 to disable the update. WPA /WPA2 - Enterprise - It's based on Radius Server. Version - you can choose the version of the WPA security on the drop-down list. The default setting is Automatic, which can select WPA (Wi-Fi Protected Access) or WPA2 (WPA version 2) automatically based on the wireless station's capability and request. Encryption - You can select either Automatic, or TKIP or AES. Note: If you check the WPA /WPA2 - Enterprise radio button and choose TKIP encryption, you will find a notice in red as shown in Figure 4-23. Figure 4-23 Radius Server IP - Enter the IP address of the Radius server. - 47 -