Thermador PRD304EG Use and Care Guide - Page 17
Using The Cooktop
![]() |
View all Thermador PRD304EG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Using The Cooktop Sealed Burners The cooktop features four or six gas surface burners; each rated at 15,000 BTU/HR (13,000 BTU/ HR using Propane). The burners are sealed to the stainless steel top frame to prevent liquid spills from accumulating below the top surface, making it easier to clean. On all models, the two left burners have the exclusive ExtraLow feature, the remaining burners are standard. Each burner has its own control knob. Control Knobs Figure 2: Sealed Star® Brass Burner Base The control knobs for two sealed gas burners, one in front and one in the rear, are located directly in front of and below the pair of burners on the control panel. The two words above each control knob identifies the burner position. For example, LEFT FRONT, RIGHT FRONT, etc. Setting Indicator Operation of the Burners Knob Bezel Figure 3: Standard Burner Control Knob • Press in on the knob and turn it counter-clockwise to the setting. • The igniter for the selected sealed burner clicks and sparks. • After flame ignition, the igniter stops clicking. • Rotate the knob to any flame setting between HI and SIM. • The Blue Burner Signal Light, between the burners, will light when adjacent burners are lit. They will remain on until the burner is turned off. Page 14
![](/manual_guide/products/thermador-prd304eg-use-care-guide-1ac08ab/17.png)