Thermador PRD304EG Use and Care Guide - Page 5
Safety - manual
View all Thermador PRD304EG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
require a conversion kit. Make certain your range and gas type are the same. Refer to the product rating label which can be located as indicated on Page 45. CAUTION When connecting the unit to propane gas, make certain the propane gas tank is equipped with its own high-pressure regulator in addition to the pressure regulator supplied with the range. The maximum gas pressure to this appliance must not exceed 14.0 inches water column (34.9 mb) from the propane gas tank to the pressure regulator. Important: All ranges must be installed with a backguard. The 30" model comes with a low back. For all other models, one of three available backguards must be ordered separately and installed at the back of the range. The three backguard choices include a Low Back, Pot and Pan Shelf, or Island Trim. Before using the range, insure that it is equipped with a proper backguard. DO NOT attempt to use a backguard that is not designed to fit your particular model range. Refer to the Installation Instructions accompanying this appliance for more information. WARNING To avoid possible burn or fire hazard, a backguard designed specifically for this range must be installed whenever the range is used. This manual contains important Care and Use information for all Thermador Professional® Ranges. When using this manual, it is critical that you know the model number of your range, as some information will be unique to each range. The model number may be found on the rating plate located on the range as identified on Page 45 of this manual. The charts on the following pages summarize the various range models and identify the features of each range. Safety IMPORTANT SAFETY INSTRUCTIONS READ AND SAVE THESE INSTRUCTIONS Gas and Electrical Requirements and Grounding Instructions PLEASE READ CAREFULLY 30" Dual-Fuel Models: 240/208 volts, 60 Hz., 35 Amp electrical circuit required for each line. 36" Dual-Fuel Models: 240/208 volts, 60 Hz., 35 Amp electrical circuit required for each line. 48" Dual-Fuel Models: 240/208 volts, 60 Hz., 50 Amp electrical circuit required for each line. Page 2