Thermador PRD304EG Use and Care Guide - Page 43

3. Use only clean soft cloths, sponges, paper towels, fibrous brushes, plastic, nonmetal or steel wool soap pads for cleaning and scouring, as recommended on the chart. 4. Any part of this appliance can be cleaned with hot sudsy water. When rinsing is required, rinse thoroughly. 5. Always wipe dry immediately to avoid water marks. CAUTION Avoid cleaning any part of the range while it is hot. Brand Names The use of brand names is intended only to indicate a type of cleaner. This does not constitute an endorsement. The omission of any brand name cleaner does not imply its adequacy or inadequacy. Many products are regional in distribution and can be found in the local markets. It is imperative that all products be used in strict accordance with instructions on the package. The following chart gives directions for cleaning this range. Cleaning Recommendations PART/MATERIAL Brass Burner Base and Cast Iron Cap Brass Burner Base Burner Cap SUGGESTED CLEANERS IMPORTANT REMINDERS • Hot sudsy water; rinse and dry thor- • Do not scratch or gouge oughly. the port openings of burner • Mild Abrasive Cleansers: Bon Ami®, cap. Cameo® Aluminum and Stainless Steel Cleaner, Wright's® All Purpose Brass Polish. • Liquid cleaners: Kleen King®. • Stiff nylon bristle tooth brush to clean port openings. • Reassemble as shown. Make sure that the burner cap is seated on the base. Ports Control Knobs/Metal Bezels/Chrome • Hot sudsy water; rinse and dry immediately. • Do not soak knobs. Do not force knobs onto wrong valve shaft. Page 40