Toshiba 52XF550U Owner's Manual - English - Page 20

40XF550U_EN.book Page 20 Wednesday, January 30, 2008 3:55 PM Chapter 3: Using the remote control Preparing the remote control for use Your TV remote control can operate your TV and many other devices such as cable converter boxes, satellite receivers, VCRs, DVD players, and HTIBs (home theater in a box), even if they are different brands. If you have a Toshiba device: Your TV remote control is preprogrammed to operate most Toshiba devices (- page 24). If you have a non-Toshiba device or a Toshiba device that the remote control is not preprogrammed to operate: You can program the TV remote control so it will operate the other device (- pages 22-32). Installing the remote control batteries 1 Slide the battery cover off the back of the remote control. 2 Install two "AA" size alkaline batteries. Match the + and - symbols on the batteries to the symbols on the battery compartment. 3 Slide the battery cover on to the remote control until the lock snaps. Caution: Batteries must not be exposed to excessive heat such as sunshine, fire or the like. Note: • Be sure to use AA size alkaline batteries. • Dispose of batteries in a designated disposal area. • Batteries should always be disposed of with the environment in mind. Always dispose of batteries in accordance with applicable laws and regulations. • If the remote control does not operate correctly, or if the operating range becomes reduced, replace batteries with new ones. • When necessary to replace batteries in the remote control, always replace both batteries with new ones. Never mix battery types or use new and used batteries in combination. • Always remove batteries from the remote control if they are dead or if the remote control is not to be used for an extended period of time. This will prevent battery acid from leaking into the battery compartment. 20 XF550U (E/F) Web 213:276