Toshiba GSC-R30 Owners Manual - Page 31
Charging in the Camera, Plug the DC plug on the AC adapter into the DC IN 10V
View all Toshiba GSC-R30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Charging in the Camera Terminal cover 1 Open the terminal cover on the camera. 2 Connect the power cord and AC adapter and then plug the power cord into the mains power socket. 3 Plug the DC plug on the AC adapter into the DC IN 10V socket on the camera. When battery charging begins, the STATUS LED on the camera lights red. When charging is completed, the STATUS LED on the camera turns green. IMPORTANT • The battery is charged while in the camera. Never attempt to charge the battery with another charger. • If a problem arises during charging, unplug the power cord from the mains power outlet, remove the battery from the camera and contact Toshiba Customer Service Department or Toshiba Customer Support Department. Be careful when removing the battery as it can become hot. • If the camera is charged in conditions where it becomes hot (in direct sunlight, etc.), the heat in the camera may trigger a sensor in the camera that prevents charging from beginning immediately. If this occurs, allow the camera to cool fully before charging. MEMO • To get the best possible performance from your battery, charge it when the ambient temperature is between 50°F (10°C) and 86°F (30°C). Battery Level Display When you turn the camera on, the level of charge in the battery appears on the LCD monitor. Display Meaning Fully charged Low charge Almost out of Running on the charge AC adapter