Toshiba M105-S3004 User Manual - Page 140

POWER AND POWER-UP MODES User's Manual ❑ Specify restrictions for general users. Starting the computer by password If you registered a password, there are two ways to start the computer: ❑ Insert a password token before you turn on the computer. The computer will start normally, without displaying a password prompt. ❑ Enter the password manually. NOTE: The password is necessary only if the computer was shut down in boot mode. It is not needed in Hibernation or Standby mode. To enter a password manually, follow these steps: 1. Turn on the power as described in Chapter 3, Getting Started. The following message will appear in the LCD: Password= 2. Enter the Password. 3. Press Enter. NOTE: If you enter the password incorrectly three times in a row, the computer shuts off. In this case, you must turn the computer back on to retry password entry. Power-up modes The computer has the following power-up modes: ❑ Boot: Computer shuts down without saving data. Always save your work before you turn the computer off in boot mode. ❑ Hibernation: Data in memory is saved to the hard disk. ❑ Standby: Data is maintained in the computer's main memory. NOTE: Refer also to the sections Turning on the power and Turning off the power in Chapter 3, Getting Started. Windows utilities You can specify the setting in TOSHIBA Power Saver. 6-18