Toshiba M105-S3004 User Manual - Page 197
Modem, CONNECT
UPC - 032017538498
View all Toshiba M105-S3004 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 197 highlights
Hardware and system checklist Modem Refer to the online help files for Appendix C and D. Problem Procedure Communication software can't initialize modem Make sure the computer's internal modem settings are correct. Refer to Modem Properties in the Control Panel. You can hear a dial tone but can't make a call If the call is going through a PBX machine, make sure the communication application's tone dial detection feature is disabled. You can also use the ATX command. Refer to the online help files for Appendix C, AT Commands. You place a call, but a connection can't be made Make sure the settings are correct in your communications application. After making a call you can't hear a ring Make sure the tone or pulse selection in your communications application is set correctly. You can also use the ATD command. Refer to the online help files for Appendix C, AT Commands. Communication is cut off unexpectedly The computer will automatically cut off communication when connection with the carrier is not successful for a set time interval. Try lengthening this time interval. A CONNECT display Check the error control setting in your is quickly replaced by communications application. TROUBLESHOOTING 9-19