Toshiba RD-XS34 User Manual - Page 157
Pause/Still
![]() |
View all Toshiba RD-XS34 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
Introduction Recording Playback Editing Picture/Audio settings PAL/Auto HDD DVD-RAM DVD-RW DVD-R DVD-VIDEO VCD PAL: To play a PAL disc. Connect a PAL TV to view a picture. Auto: The recorder automatically identifies PAL or NTSC video system of a disc. Connect a multisystem TV (PAL/NTSC compatible) to view a picture. A playback picture may be distorted when detected a signal change between PAL and NTSC on the disc. Note: Alert message is displayed when detected both PAL and NTSC video system on the same disc. Pause/Still HDD DVD-RAM DVD-RW DVD-R DVD-VIDEO Auto: Normal setting. Pause the moving image without blurring. Frame: Displays high resolution still image. Custom picture select HDD DVD-RAM DVD-RW DVD-R DVD-VIDEO VCD Select from between 4 picture settings (Normal, Setting 1-3) you stored in the memory. Custom picture setting HDD DVD-RAM DVD-RW DVD-R DVD-VIDEO VCD You can adjust fine picture quality and store up to 3 custom picture settings in the memory of the recorder. 1) Press the / button to select a desired setting from 3 settings, and then press the ENTER button. e.g. Picture/Audio settings PAL/Auto PAL Pause / Still Auto Custom picture select Normal Custom picture setting Progressive conversion Auto Play DNR Audio out select Bitstream Virtual surround Off NICAM On Setting 1 Setting 2 Setting 3 SETUP 2) Press the / buttons to select adjustable items, and then press the / buttons to select each parameter. Brightness (0) Darker ⇔ Brighter (7) Contrast (-7) Lower ⇔ Higher (0) Color (-7) Duller ⇔ Brighter (0) Edge enhance (OFF) Normal ⇔ Sharp (ON) 3) After adjusting the items, press the ENTER button. Progressive conversion HDD DVD-RAM DVD-RW DVD-R DVD-VIDEO VCD There are two types of source content in pictures recorded in DVD video discs: film content (pictures recorded from films at 24 frames per second) and video content (video signals recorded at 25 frames in PAL (30 frames in NTSC) per second). Make this selection according to the type of content being viewed. Auto: Select this position normally. The recorder automatically detects source content, film or video, of playback source, and converts that signal in the progressive output format in an appropriate method. Video: The recorder filters video signal, and converts it in the progressive output format appropriately. Suitable for playback of video content pictures. Film: The recorder converts film content pictures in the progressive output format appropriately. Suitable for playback of film content pictures. The progressive output feature will be most effective under this selection. Note • Depending on the disc, pictures may be cut off or doubled. Library Function setup Others 157 RD-XS34SB_Ope_E_p149-164 157 12/18/04, 5:53 PM
![](/manual_guide/products/toshiba-rdxs34-user-manual-ab5184f/157.png)