Weider Pro 8500 Smith Cage Bench English Manual - Page 18
Attach the Butterfly Cable 71 to the Left Arm
View all Weider Pro 8500 Smith Cage Bench manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
25. Route the Butterfly Cable (71) under a 90mm Pulley (58). Attach the 90mm Pulley to the Short 25 Double U-bracket (46) with an M10 x 43mm Bolt (96) and an M10 Locknut (79). 26. Route the Butterfly Cable (71) over a V-pulley (60). Attach the V-pulley, a Short Metal Cable 26 Trap (61), and an M10 Washer (84) to the Backrest Upright (8) with an M10 x 60mm Bolt (88) and an M10 Locknut (79). Make sure that the Short Metal Cable Trap is oriented to hold the Butterfly Cable in the groove of the V-pulley. 71 79 58 46 96 61 8 79 60 88 84 71 27. See the inset drawing. Orient the other end of the Butterfly Cable (71) so that the flat side is facing downward as shown. Attach the Butterfly Cable (71) to the Left Arm (10) with an M8 x 20mm Shoulder Bolt (85) and an M8 Locknut (78). Do not overtighten the Locknut; the Butterfly Cable must pivot easily. 27 71 85 10 71 78 Flat Side 18