Weider Pro 8500 Smith Cage Bench English Manual - Page 19
Slide a Cable Stop 52 onto the Low Cable 72.
View all Weider Pro 8500 Smith Cage Bench manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
28. Identify the Low Cable (72). 28 Slide a Cable Stop (52) onto the Low Cable (72). Hold an M6 Locknut (100) inside a Clip (53), and insert the Low Cable (72) into the Clip and the Locknut. Next, hold the crimp on the Low Cable with pliers, and insert a screwdriver between the Clip and the Locknut. Rotate the screwdriver, the Clip, and the Locknut together until at least two threads of the Low Cable show past the Locknut. Then, slide the Cable Stop (52) onto the Clip (53). 100 52 72 53 84 55 79 Next, route the Low Cable (72) through the Backrest Upright (8) and under a 115mm Pulley (59). Attach the 115mm Pulley inside the Backrest Upright with an M10 x 90mm Bolt (89), two M10 Washers (84), two 25mm Spacers (55), and an M10 Locknut (79). 8 84 89 55 59 29. Route the Low Cable (72) over a 90mm Pulley (58). Attach the 90mm Pulley to the Short Double 29 U-bracket (46) with an M10 x 43mm Bolt (96) and an M10 Locknut (79). 79 46 58 96 72 30. Route the Low Cable (72) under a 90mm Pulley (58). Attach the 90mm Pulley to the Center Base 30 (2) with an M10 x 43mm Bolt (96) and an M10 Locknut (79). 72 96 58 79 2 19