Weider Pro 8500 Smith Cage Bench English Manual - Page 23

Make sure that the, Cable Trap is oriented to hold the High Cable, in the groove of the Pulley.

Get Weider Pro 8500 Smith Cage Bench PDF manuals and user guides View all Weider Pro 8500 Smith Cage Bench manuals
Add to My Manuals
Save this manual to your list of manuals

Page 23 highlights

39. Route the High Cable (54) under a 90mm Pulley (58). Attach the 90mm Pulley to the Center Base 39 (2) with an M10 x 43mm Bolt (96) and an M10 Locknut (79). 40. Route the High Cable (54) over a 90mm Pulley (58). Attach the 90mm Pulley and a Plastic Cable 40 Trap (63) to the lower holes of the Long Double U-bracket (47) with an M10 x 50mm Bolt (104) and an M10 Locknut (79). Make sure that the Cable Trap is oriented to hold the High Cable in the groove of the Pulley. 58 96 54 79 2 104 47 79 58 63 54 41. Route the High Cable (54) under a 90mm Pulley (58). Attach the 90mm Pulley to the Center Base 41 (2) with an M10 x 43mm Bolt (96) and an M10 Locknut (79). 54 58 96 2 79 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
23
40. Route the High Cable (54) over a 90mm Pulley
(58). Attach the 90mm Pulley and a Plastic Cable
Trap (63) to the lower holes of the Long Double
U-bracket (47) with an M10 x 50mm Bolt (104)
and an M10 Locknut (79).
Make sure that the
Cable Trap is oriented to hold the High Cable
in the groove of the Pulley.
41. Route the High Cable (54) under a 90mm Pulley
(58). Attach the 90mm Pulley to the Center Base
(2) with an M10 x 43mm Bolt (96) and an M10
Locknut (79).
41
2
54
58
79
96
54
58
63
104
47
79
40
39. Route the High Cable (54) under a 90mm Pulley
(58). Attach the 90mm Pulley to the Center Base
(2) with an M10 x 43mm Bolt (96) and an M10
Locknut (79).
79
58
54
2
96
39