Weider Pro 8500 Smith Cage Bench English Manual - Page 27
See step 51. Tighten the M8 Locknuts 78.
View all Weider Pro 8500 Smith Cage Bench manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
50. Attach two Stabilizer Feet (50) to the Bench Stabilizer (108) with four M4 x 19mm 50 Screws (82). 108 50 51. Attach the Bench Stabilizer (108) to the Bench Frame (107) with two M8 x 70mm Carriage Bolts 51 (143) and two M8 Locknuts (78). Do not tighten the Locknuts yet. 82 82 107 50 78 108 52. Attach the Leg Bumper (135) to the Front Leg (109) with an M4 x 19mm Screw (82). Attach the Front Leg (109) to the Bench Frame (107) with two M10 x 65mm Bolts (105), two M10 Washers (84), and two M10 Locknuts (79). Make sure that the Locknuts are inside the indicated hexagonal holes. See step 51. Tighten the M8 Locknuts (78). 52 109 135 82 143 105 84 107 79 Hexagonal Holes 53. Apply grease to an M10 x 75mm Hex Bolt (106). 53 Attach the Leg Lever (110) to the Front Leg (109) with the M10 x 75mm Hex Bolt (106) and an M10 Locknut (79). Do not overtighten the Locknut; the Leg Lever must pivot easily. 109 79 110 Grease 106 27