Weider Pro 8500 Smith Cage Bench English Manual - Page 22
Metal Cable Trap 62, and an M10 Washer 84
View all Weider Pro 8500 Smith Cage Bench manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
36. Route the High Cable (54) over a 90mm Pulley (58). Attach the 90mm Pulley and a Plastic Cable 36 Trap (63) to the left Side Top Frame (13) with an M10 x 50mm Bolt (104) and an M10 Locknut (79). Make sure that the Plastic Cable Trap is oriented to hold the High Cable in the groove of the 90mm Pulley. 54 58 63 104 13 79 37. Route the High Cable (54) under a 90mm Pulley (58). Attach the 90mm Pulley to the left Base 37 (1) with an M10 x 43mm Bolt (96) and an M10 Locknut (79). 38. Route the High Cable (54) around a 115mm Pulley (59). Attach the 115mm Pulley, a Long 38 Metal Cable Trap (62), and an M10 Washer (84) to the Center Base (2) with an M10 x 75mm Bolt (102) and an M10 Locknut (79). Make sure that the Long Metal Cable Trap is oriented to hold the High Cable in the groove of the 115mm Pulley. 54 58 96 79 1 102 84 59 54 62 2 79 22