Weider Pro 8500 Smith Cage Bench English Manual - Page 24

42. Route the High Cable (54) around a 115mm Pulley (59). Attach the 115mm Pulley, a Long 42 Metal Cable Trap (62), and an M10 Washer (84) to the Center Base (2) with an M10 x 75mm Bolt (102) and an M10 Locknut (79). Make sure that the Long Metal Cable Trap is oriented to hold the High Cable in the groove of the 115mm Pulley. 43. Route the High Cable (54) under a 90mm Pulley (58). Attach the 90mm Pulley to the right Base 43 (1) with an M10 x 43mm Bolt (96) and an M10 Locknut (79). 44. Route the High Cable (54) over a 90mm Pulley (58). Attach the 90mm Pulley and a Plastic Cable 44 Trap (63) to the right Side Top Frame (13) with an M10 x 50mm Bolt (104) and an M10 Locknut (79). Make sure that the Plastic Cable Trap is oriented to hold the High Cable in the groove of the 90mm Pulley. 102 59 84 54 62 2 79 54 58 79 96 1 13 54 58 104 63 79 24