Weider Pro 8500 Smith Cage Bench English Manual - Page 21
Attach a Cable Stop 52, a Clip 53, and an M6
View all Weider Pro 8500 Smith Cage Bench manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
34. Attach the Low Cable (72) inside the Weight Carriage (41) with an M10 x 68mm Bolt (90), two 34 M10 Washers (84), two 24mm Spacers (45), and an M10 Locknut (79). Attach the lower Carriage Bushing (42) inside the Weight Carriage (41) with an M10 x 68mm Bolt (90), two M10 Washers (84), a 50mm Spacer (44), and an M10 Locknut (79). 72 45 90 84 45 41 84 79 42 44 35. Identify the High Cable (54). Attach a Cable Stop (52), a Clip (53), and an M6 Locknut (100) to the High Cable (54) as described in step 28. Make sure that at least two threads of the High Cable show past the Locknut. Next, route the High Cable (54) upward through the left Upright (3) and over a 90mm Pulley (58). Attach the 90mm Pulley inside the left Upright with an M10 x 45mm Bolt (141) and an M10 Locknut (79). 35 Rod 32 141 54 3 79 52 53 58 100 21