Weider Pro 8500 Smith Cage Bench English Manual - Page 9

Insert two M10 x 65mm Carriage Bolts 83

Get Weider Pro 8500 Smith Cage Bench PDF manuals and user guides View all Weider Pro 8500 Smith Cage Bench manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

2. Attach a Stabilizer Foot (50) to a Base (1) with two M4 x 19mm Screws (82). 2 Next, orient a Base Foot (51) as shown. Attach the Base Foot (51) to the Base (1) with two M4 x 19mm Screws (82). Then, insert four M10 x 65mm Carriage Bolts (83) upward through the Base (1). Apply tape over the bolt heads to hold them in place. Repeat this step with the other Base (1). Make sure that the Base Foot (51) is oriented as shown. 1 51 1 51 83 82 3. Insert two M10 x 65mm Carriage Bolts (83) upward through the Center Base (2). Place tape over the bolt heads to hold them in place. 50 83 82 3 2 83 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
9
2.
Attach a Stabilizer Foot (50) to a Base (1) with
two M4 x 19mm Screws (82).
Next, orient a Base Foot (51) as shown.
Attach the Base Foot (51) to the Base (1) with
two M4 x 19mm Screws (82).
Then, insert four M10 x 65mm Carriage Bolts
(83) upward through the Base (1). Apply tape
over the bolt heads to hold them in place.
Repeat this step with the other Base (1).
Make sure that the Base Foot (51) is oriented
as shown.
2
1
1
82
51
51
82
50
83
83
3.
Insert two M10 x 65mm Carriage Bolts (83)
upward through the Center Base (2). Place tape
over the bolt heads to hold them in place.
83
2
3