Weider Pro 8500 Smith Cage Bench English Manual - Page 6

PART IDENTIFICATION CHART Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. Note: If a part is not in the hardware kit, check to see whether it has been preassembled. Extra hardware may be included. If a part is missing, call 1-877-992-5999. M10 x 180mm Bolt (40) 6mm Spacer (75) 17mm Spacer (66) 24mm Spacer (45) 25mm Spacer (55) 50mm Spacer (44) M6 Washer (86) M8 Washer (94) M10 Large Washer (76) M8 x 15mm Screw (21) M8 x 20mm Screw (34) M6 Locknut (100) M8 x 20mm Shoulder Bolt (85) M10 Split Washer (93) M8 Locknut (78) M10 x 20mm Bolt (77) M10 Washer (84) M10 Locknut (79) M4 x 19mm Screw (82) 6 M10 x 25mm Screw (98) M10 x 30mm Screw (95)