Xerox 4400DT Service Manual - Page 20

Printer Memory Configuration The printer features two slots which accept 32-, 64-, and 128-Mbyte SDRAM DIMMs. All combinations except 32 Mbytes alone are allowed to a maximum of 256 Mbytes. The Phaser 4400B reports 32 Mbytes of memory, even though it has a 64-Mbyte DIMM installed. In order to get the full 64 Mbytes of memory to be reported as well as activate other features, users must upgrade to the N-model with a Configuration Upgrade Kit, part number 098S04703. The Startup page and the Configuration pages list the amount of RAM installed in the printer. If the memory does not meet the following specifications, it is ignored by the printer. I PC133 DRAM Standard I 144-Pin SODIMM I Serial Presence Detect I 3.3 Volt Monitoring Consumables The status of printer consumables is available through the Supplies Info Menu. Replaceable Items Print Life Print Cartridge (rated at 5% image coverage of letter-size paper) High-Capacity 15,000 Toner wt. 620 g (1.36 lbs.) Standard-Capacity 10,000 Toner wt. 420 g. (.9 lbs.) Maintenance Kit (includes Fuser, Transfer Roller, and nine rollers for Feed, Retard, and Nudger Roller assemblies). up to 200,000 Repackaging Information If the printer must be returned to Xerox and the customer has not saved the shipping box and all internal packaging, a repackaging kit is available for order from the local Customer Support Center. Repackaging Kit: part number 065-0606-00 Phaser 4400 Laser Printer Service Manual 1-3