Yamaha DSP5D Pm5dv2 / Dsp5d Editor Owner's Manual - Page 10
Channel name, Fader, groups to which
View all Yamaha DSP5D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Q Q Channel name This is a text box that displays the channel name. You can also edit the channel name in this text box. Note that while the channel number (L) does not change when you switch pairing mode in the Mixer Setup window, the channel name display will change according to R the pairing mode. For example if the CH1-24 layer is displayed, and you switch the pairing mode from Horizontal to Vertical, the channel name indications that had been arranged in the order of channels 1, 2, 3 ... 24, 25 will change to the order of 1, 3, 5 ... 45, 47. R Fader Adjusts the input level of the input channel. This is linked with the INPUT channel strip faders on the PM5D panel. The current fader value is shown in the numeric box immediately below the fader. The level meter at the right of the fader shows the level of the input signal. S The numbers and The numbers of DCA groups to which this alphabetical letters at channel belongs are shown in yellow. the right of the fader indicate the DCA group and mute groups to which that channel belongs, and show the Recall Safe and Mute Safe status of the channel. The numbers of mute groups to which this channel belongs are shown in red. If this channel is set to Recall Safe, the R character is shown in orange. If this channel is set to Mute Safe, the M character is shown in red. S CUE This button cue-monitors the signal of the input channel. This is linked with the INPUT channel strip [CUE] keys on the PM5D panel. If SOLO is active, this will function as SOLO. 10 PM5DV2/DSP5D Editor Owner's Manual