Yamaha DSP5D Pm5dv2 / Dsp5d Editor Owner's Manual - Page 81
Houtput Solo Safe Ilevel Meter Jmonitor/cue Delay Kcue Level Lcue Out
![]() |
View all Yamaha DSP5D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
H OUTPUT SOLO SAFE Here you can select the output channels that will be excluded from solo operations (multiple selections are allowed). These buttons correspond to the following output channels. MIX 1-24 MATRIX 1-8 STEREO A/B SET ALL CLEAR ALL MIX channels 1-24 MATRIX channels 1-8 STEREO A/B channels Activates solo safe for all output channels Defeats solo safe for all output channels HINT Solo safe settings and cue on/off settings are linked for two paired channels. Solo safe operations can be performed independently of scene memories. I Level meter This is a peak level meter that indicates the level of the signal being output from the CUE OUT jacks. As the point at which the level is detected, you can choose either immediately before the delay provided on the MONITOR/ CUE bus output (when the PRE DELAY button is on), or immediately after it (when the POST DELAY button is on). J MONITOR/CUE DELAY Here you can make settings for the delay function that is provided on the MONITOR/CUE output. Use the knob to specify the delay time (0-1000 msec), and use the DELAY button to turn the delay on/off. If the AUTO BYPASS button is on, the delay will be automatically bypassed when you perform a cue operation. K CUE LEVEL This adjusts the output level of the cue signal. L CUE OUT This switches the cue output on/off. 81 PM5DV2/DSP5D Editor Owner's Manual
![](/manual_guide/products/yamaha-dsp5d-pm5dv2-dsp5d-editor-owners-manual-858ca2d/81.png)