Yamaha DSP5D Pm5dv2 / Dsp5d Editor Owner's Manual - Page 30
CH to MIX Channel to mix, ON MIX send on/off, PRE Pre/Post, CH to MIX PRE POINT
![]() |
View all Yamaha DSP5D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
❏ CH to MIX (Channel to mix) 2 1 3 4 5 A MIX send level This adjusts the send level of the signal sent from the input channel to VARI-type MIX buses. The current value is shown in the numerical box immediately above. B Pair This indicates the pairing status of adjacent odd-numbered/even-numbered MIX channels. You can click the heart symbol to enable/disable pairing. C ON (MIX send on/off) This is an on/off switch for the signal sent from the input channel to the MIX bus. D PRE (Pre/Post) This selects PRE or POST as the point from which the signal is sent from the input channel to the MIX bus. E CH to MIX PRE POINT This selects PRE EQ or PRE FADER as the point from which the signal is sent when the PRE button (4) is set to PRE. NOTE If the PRE button is set to POST, you can select either POST ON or POST TO ST as the signal send location individually for each MIX bus (➥ p.35). 30 PM5DV2/DSP5D Editor Owner's Manual
![](/manual_guide/products/yamaha-dsp5d-pm5dv2-dsp5d-editor-owners-manual-858ca2d/30.png)