Yamaha DSP5D Pm5dv2 / Dsp5d Editor Owner's Manual - Page 38
Compressor, Insert, Equalizer, Delay, Dca Group / Mute Group / Safe, Pan / Fader
![]() |
View all Yamaha DSP5D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
❏ COMPRESSOR Except for the fact that the COMP LINK GROUP is A-H, and that the types of signal that can be selected for keyin are different, this is the same as for the compressor of an input channel (➥ p.25). ❏ INSERT Except for the fact that the insert points that can be selected are different, this is the same as for the insert settings of an input channel (➥ p.26). ❏ EQUALIZER This is the same as the equalizer settings of a MIX channel (➥ p.32). ❏ DELAY This is the same as for the delay settings of an input channel (➥ p.28). ❏ DCA GROUP / MUTE GROUP / SAFE These are the same as the DCA Group / Mute Group / Safe settings of a MIX channel (➥ p.33). ❏ Pan / Fader A BALANCE Adjusts the left/right output balance of the STEREO A/B channel. 1 B ON This switches the STEREO A/B channel on/off. This is linked with the STEREO [ON] 2 key in the STEREO A/B channel strip of the PM5D panel. 3 C MONO (ST B channel only) Switches the ST B channel between stereo/mono. D Fader 4 Adjusts the output level of the STEREO A/B channel. This is linked with the STEREO fader in the STEREO A/B channel strip of the PM5D panel. The current value is shown in the numerical box immediately below. A level meter is shown beside the fader. E CUE This button cue-monitors the signal of the STEREO A/B channel. This is linked with the STEREO [CUE] key in the STEREO A/B channel strip of the PM5D panel. If SOLO is active, this will function as SOLO. 5 38 PM5DV2/DSP5D Editor Owner's Manual
![](/manual_guide/products/yamaha-dsp5d-pm5dv2-dsp5d-editor-owners-manual-858ca2d/38.png)