Yamaha DSP5D Pm5dv2 / Dsp5d Editor Owner's Manual - Page 52
Output meter, Output patch, GR meter, Equalizer
![]() |
View all Yamaha DSP5D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
H Output meter Indicates the level of the signal being output from the internal effect. I Output patch Click the L CHANNEL or R CHANNEL area, and choose one of the following as the signal route that will be patched to the L/R output channels of the internal effect. NONE CH 1...CH 48 STIN1L, STIN1R...STIN4L, STIN4R FXRTN1L, FXRTN1R...FXRTN4L, FXRTN4R INS CH1...INS CH48 INS STIN1L, INS STIN1R...INS STIN4L, INS STIN4R INS MIX1...INS MIX24 INS MTRX1...INS MTRX8 INS STAL, INS STAR INS STBL, INS STBR INS MON L, INS MON R, INS MON C Not inserted Input channel 1-48 input ST IN channel 1-4 (L/R) input FX RTN channel 1-4 (L/R) input Input channel 1-48 insert in ST IN channel 1-4 (L/R) insert in MIX channel 1-24 insert in MATRIX channel 1-8 insert in STEREO A channel (L/R) insert in STEREO B channel (L/R) insert in MONITOR channel (L/R/C) insert in If you select something other than NONE or INS MON as the insert destination, the channel name will appear in the box located immediately below. J GR meter If "044 M.BAND DYNA", "045 M.BAND COMP" or "055 De-Esser" are selected as the effect type, this indicates the gain reduction amount for the H (HIGH), M J (MID), and L (LOW) bands. K SOLO If "044 M.BAND DYNA" or "045 M.BAND COMP" are selected as the effect type, these buttons allow you to monitor only the specified band from the three bands HIGH, MID, and LOW. L Equalizer K If "053 EQUALIZER601" is selected as the effect type, the FLAT button which sets the EQ values to a flat state and the DRIVE button and CLEAN button which specify the EQ type will become active. L 52 PM5DV2/DSP5D Editor Owner's Manual
![](/manual_guide/products/yamaha-dsp5d-pm5dv2-dsp5d-editor-owners-manual-858ca2d/52.png)